Cemfloor NH Technical Data Sheet | High-Performance Screed - Doyle Concrete Ireland

Access the Cemfloor HPC Technical Data Sheet (TDS) in PDF format on Doyle Concrete's site. Explore specifications and details for your projects.

Readymix Concrete, Slats Pre-cast etc - Hugginstown Office

056-7768650

Readymix Concrete Waterford Depot

051 370777

Pre-cast, Sand Blocks Etc The Old Mart, The Old Kilmeadon Road, Waterford

051 886006

Email

info@doylceconcrete.ie

Facebook Twitter Youtube Linkedin
Download Pdf

BROCHURES

FARMING BROCHURE

DOWNLOAD

RESIDENTIAL/ COMMERCIAL BROCHURE

DOWNLOAD

Cemfoor is a specially formulated binder that is used to create self levelling cementitious foor screeds. With the addition of Cemfoor the screeds performance is increased signifcantly and can be applied to a wide range of foors. Cemfoor binder is simply mixed with cement, water and a suitable sand to create a high performance screed which complies with EN 13813.

Key Features & Benefts

  • Thinner sections compared to traditional screeds.
  • Minimal Drying Shrinkage (<0.05%)
  • Larger foor area without joints (up to 150m2 for foors with NO underfoor heating.
  • Foot traffc after 24–48 hours
  • Produced in a ISO 9001 certifed facility and delivered to site ready for use.
  • Can be applied in wet areas.
  • Reduced drying times (Depending on drying conditions)
  • Self compacting – uniform strength across entire foor area.
  • No risk of contamination at concrete mixing plants.
  • No Surface Laitance (Dust) after curing.
  • Easy Installation (Reduces time & costs).

Substrate

Cemfoor Screed is designed for use as a bonded thick levelling screed on concrete, as a foating screed over thermal or acoustic insulation, or as an unbonded screed on top of a plastic membrane.

Storage

Store in a dry designated area. Material is available in bulk, 1000kg & 25kg bags.

Safety

This product may cause skin irritation. Use goggles, gloves and protecting cream. Avoid prolonged contact with skin. Avoid inhaling the dust. Wash affected area with warm water and soap. Wash eyes thoroughly and consult a physician. Do not ingest.

Mix Design

Trials should always be carried out to optimize the mix design before work commences. The sand used should be of an approved quality and grading. The screed is a blend of Cemfoor, cement, sand & water. The mix proportions depend on the sand available.

Application

Cemfoor screeds should be used in accordance with BS 8204-7:2003 ‘Code of Practice for Pumpable Self- Smoothing Screeds’. To ensure a high quality screed it is recommended that application is carried out by a specialist screeding contractor who has been approved to place Cemfoor. The freshly poured screed will need to be levelled using a dappling bar, ensuring to dapple the surface in two passes at 90 o .

Curing

After placing the foor should not be subjected to severe draughts, direct sunlight or heating for the frst 24-48 hours. The room in which the screed has been placed should therefore be sealed during this time. The room should be ventilated after 24-48 hours by opening windows and doors during the day to aid the drying process.

Floor Coverings

Cemfoor screed is compatible with all foor coverings, and all cementitious adhesives including fast track systems. The screeds moisture content should be measured before placing foor coverings to ensure that it is adequately dried. Cemfoor screed will not require any sanding to remove laitance, but it is recommended to lightly abrade the surface to clean and remove any building residue and to improve the adhesion of the fooring adhesive to the hardened screed.

Technical Information

Cemfoor is produced in an ISO 9001 quality-controlled environment. Self levelling screeds produced with Cemfoor meet the requirements of EN 13813:2002 ‘Screed Material for Floor Screeds’.

Screed SpecifcationEN 13813:2002
Compressive StrengthC25
Flexural StrengthF5
Minimum ThicknessBonded: 25mm Unbonded: 30mm
Floating: Domestic: 35mm Commercial: 40mm
Shrinkage (28 Days)<0.05%
Flow Ratev
Fresh Density2100–2200 kg/m3
BRE Impact TestCategory A
Open to Light Foot Traffc24-48 Hours
Maximum Bay Sizes
Non-Heated Floors =150m2
Icon-facebook Twitter Youtube Icon-linkedin

Adresses

Readymix Concrete, Slats Pre-cast etc - Hugginstown Office

056-7768650

Readymix Concrete Waterford Depot

051 370777

Pre-cast, Sand Blocks Etc The Old Mart, The Old Kilmeadon Road, Waterford

051 886006

info@doyleconcrete.ie

Services

Company links

NewsLetter

By subscribing to our mailing list you will always be updated with the latest news from us.

    All Rights Reserved. Doyle Concrete 2025.

    Brand and Web Creation by Brand You Creative Agency

    ENQUIRE
    X